在H型钢上边开与立柱螺栓连接眼，便于与立柱连接。下边焊接连接底板，底板上面开膨胀螺栓眼，便于用膨胀螺栓将货架与地面连接。以固定货架。Ji'nan cantilever shelf base is made of H steel or special profiles. H type steel is selected according to the requirements of the relevant provisions of the national standard steel. In the H type steel above the open and stud bolt connection, easy to connect with the column. The bottom plate is connected with the bottom plate, and the top of the bottom plate is provided with an expansion bolt hole, which is convenient for connecting the shelf and the ground with an expansion bolt. Fixed shelf.

1.采用方管制作。济南悬臂式货架 http://www.jndyhj.com/根据相应的悬臂层载要求，先选定符合层载要求的方管，切割成需要尺寸，在一头焊接防滑护板，另一头焊接连接U型立柱连接件制作而成。Square tube production. Ji'nan, according to the corresponding layer of the cantilever rack cantilever load requirements, select the layer with load requirements of the pipe, cut into required size, welding antislip board in a head, a head welding connection type U column connections made.

2.采用C型钢制作。济南悬臂式货架根据相应的悬臂层载要求，先选定C型钢的规格，选好后将两片C型钢对焊，焊接好后在一头焊接防滑护板，另一头焊接连接U型立柱连接件。Made of C steel. Ji'nan, according to the corresponding layer of the cantilever rack cantilever load requirements, select the specifications of the C steel, selected two pieces of C type steel butt welding, after a welding head skid plate, another head welding connection type U column connections.

3.济南悬臂式货架柱片与柱片之间采用连接杆连接，连接杆一般采用矩形管制作。为增加安全和稳定性，在连接杆上加扁铁背拉要专用拉子可将柱片紧紧固定。The connecting rod is connected between the cantilever shelf column and the column in Ji'nan. In order to increase the safety and stability of the connecting rod, the flat iron is pulled back to pull the column tightly.

所有济南悬臂式货架部件在生产完成后均为半成品，将经最后一道工序喷塑。在喷塑前先进行抛丸机抛丸除油、除锈，再进行喷塑。完成后包装发货。All of the cantilever shelves in Ji'nan after the completion of the production of semi-finished products, will be the last process spray. Before the first shot blasting machine blasting oil, rust, and then sprayed. Packing and delivery after completion.